Display Lldp Status - H3C S7500E Series Command Reference Manual

The number of LLDP neighbor information aged out
The number of CDP frames transmitted
The number of CDP frames received
The number of CDP frames discarded
The number of CDP error frames

display lldp status

Syntax
display lldp status [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI Configuration in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256
characters.
Description
Use the display lldp status command to display LLDP status information.
If no port is specified, this command displays the global LLDP status as well as the LLDP status
information of all ports.
Examples
# Display the global LLDP status as well as the LLDP status information of all ports.
<Sysname> display lldp status
Global status of LLDP: Enable
The current number of LLDP neighbors: 0
The current number of CDP neighbors: 0
LLDP neighbor information last changed time: 0 days,0 hours,4 minutes,40 seconds
Transmit interval
Field
: 30s
Number of the LLDP neighbor information entries that
have aged out
Total number of the CDP frames transmitted
Total number of the CDP frames received
Total number of the CDP frames dropped
Total number of the CDP error frames received
20-13
Description