H3C S7500E Series Command Reference Manual page 186

Lan switching
Hide thumbs Also See for S7500E Series:
Table of Contents

Advertisement

Output (total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Output (normal): 0 packets, - bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Output: 0 output errors, - underruns, - buffer failures
0 aborts, 0 deferred, 0 collisions, 0 late collisions
0 lost carrier, - no carrier
# Display brief information about Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> display interface bridge-aggregation 1 brief
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface
BAGG1
DOWN auto
# Display information about all Layer 2 aggregate interfaces in DOWN state.
<Sysname> display interface bridge-aggregation brief down
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Interface
BAGG1
ADM Administratively
Table 9-1 display interface bridge-aggregation command output description
Field
Bridge-Aggregation1 current state
Unknown-speed mode,
unknown-duplex mode
PVID
Last clearing of counters
Last 300 seconds input/output
Input/Output (total)
Input/Output (normal)
Link Speed
Duplex Type PVID Description
A
A
Link Cause
The Layer 2 aggregate interface status, which can be:
DOWN ( Administratively ) – The interface is administratively shut
down with the shutdown command.
DOWN – The interface is administratively up but physically down
(possibly because no physical link is present or the link is faulty).
UP – The Ethernet interface is both administratively and physically
up.
The interface speed and duplex mode are unknown.
The default VLAN ID.
Time when the reset counters interface command was last used to
clear the interface statistics.
Never indicates the reset counters interface command has never been
used on the current interface since the device's startup.
The average input/output rate over the last 300 seconds.
The statistics of all packets received/sent on the interface.
The statistics of all normal packets received/sent on the interface.
1
Description
9-3

Advertisement

Table of Contents
loading

Table of Contents