H3C S7500E Series Command Reference Manual page 88

To use the interface command to enter ONU port view, use the using onu command to create the
corresponding ONU port first.
Examples
# Create ONU 3/0/1:5 whose sub-channel number is 5 for OLT 3/0/1.
<Sysname> system-view
[Sysname] interface olt 3/0/1
[Sysname-Olt3/0/1] using onu 5
Please wait...Done.
# Create ONU ports whose sub-channel numbers are 1 to 5 for OLT 3/0/1.
<Sysname> system-view
[Sysname] interface olt 3/0/1
[Sysname-Olt3/0/1] using onu 1 to 5
Please wait....Done.
[Sysname-Olt3/0/1] display brief interface onu
The brief information of interface(s) under bridge mode:
Interface
Onu3/0/1:1
Onu3/0/1:2
Onu3/0/1:3
Onu3/0/1:4
Onu3/0/1:5
Link Speed
DOWN --
DOWN --
DOWN --
DOWN --
DOWN --
Duplex Link-type PVID
-- access 1
-- access 1
-- access 1
-- access 1
-- access 1
2-29