Display Vendor-Specific Information - H3C S7500E Series Command Reference Manual

Lan switching
Hide thumbs Also See for S7500E Series:
Table of Contents

Advertisement

Protocol status: enabled
Total 4 MAC Group(s)
group
port

display vendor-specific information

Syntax
display vendor-specific information
View
ONU port view
Default Level
1: Monitor level
Parameters
None
Description
Use the display vendor-specific information command to display the detailed information of the
ONU when it is up.
Examples
# Display the detailed ONU information of ONU 3/0/1:1.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] display vendor-specific information
serial number
vendor id : H3C
onu mac address : 000f-e276-4b93
onu model : 0x704
onu hardware version : A
onu software version : 110
firmware version : 0x214
chipset information :
vendor id : 0x4536
chip model : 6301
revision version : 0x00
design date : 07/09/27
onu capability :
gigabit ethernet interface : not support
fast ethernet interface : support
voip service : not support
tdm ces service : not support
gigabit ethernet ports number : 0
fast ethernet ports number : 4
Field
Description
Protocol status: enabled or disabled
Total number of multicast MAC addresses recorded on the
ONU
Multicast MAC address
UNI port number
3-7

Advertisement

Table of Contents
loading

Table of Contents