Port Hybrid Protocol-Vlan - H3C S7500E Series Command Reference Manual

Examples
# Display the protocols and protocol indexes configured on all protocol-based-VLANs.
<Sysname> display protocol-vlan vlan all
VLAN ID:2
Protocol Index
======================================================
0
3
VLAN ID:3
Protocol Index
======================================================
0
1
See Table 13-5

port hybrid protocol-vlan

Syntax
port hybrid protocol-vlan vlan vlan-id { protocol-index [ to protocol-end ] | all }
undo port hybrid protocol-vlan { vlan vlan-id { protocol-index [ to protocol-end ] | all } | all }
View
Ethernet interface view, port group view, Layer 2 aggregate interface view
Default Level
2: System level
Parameters
vlan vlan-id: Specifies a VLAN ID, in the range 1 to 4094.
protocol-index: Protocol index, specified by the users or assigned by the system automatically when
the protocol-based VLAN is created. You can use the display protocol-vlan vlan all command to
display the protocol indexes.
to protocol-end: Specifies the end protocol index. The protocol-end argument must be greater than or
equal to the beginning protocol index.
all: Specifies all protocols bound with vlan-id.
Description
Use the port hybrid protocol-vlan command to associate the hybrid port(s) with a protocol-based
VLAN.
Use the undo port hybrid protocol-vlan command to remove the association.
In port group view, this command applies to all ports in the port group. For more information about
port groups, see Ethernet Interface Configuration in the Layer 2 – LAN Switching Configuration
Guide.
In Layer 2 aggregate interface view, this command applies to the Layer 2 aggregate interface and
all its member ports. After you perform the configuration, the system starts applying the
configuration to the aggregate interface and its aggregation member ports. If the system fails to do
that on the aggregate interface, it stops applying the configuration to the aggregation member
Protocol Type
ipv4
ipv6
Protocol Type
ipv4
ipv6
for description of some of the fields in the output.
13-28