Shutdown Management-Vlan-Interface - H3C S7500E Series Command Reference Manual

View
ONU port view
Default Level
2: System level
Parameters
uni-number: UNI number, in the range 1 to the maximum number of UNI ports supported by the ONU.
By default, the maximum number is 80.
Description
Use the reset counters uni command to clear the counter information of the specified UNI port.
If no UNI is specified, the counter information of all the UNIs of the ONU is cleared.
This command takes effect on H3C ONUs only.
To use this command, make sure the ONU is up.
Related commands: display uni-information.
Examples
# Clear the counter information of UNI port 1.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] reset counters uni 1

shutdown management-vlan-interface

Syntax
shutdown management-vlan-interface
undo shutdown management-vlan-interface
View
ONU port view
Default Level
2: System level
Parameters
None
Description
Use the shutdown management-vlan-interface command to shut down the management VLAN
interface of the ONU.
Use the undo shutdown management-vlan-interface command to bring up the management VLAN
interface of the ONU.
By default, a management VLAN interface is down.
After the undo shutdown management-vlan-interface command is used:
3-26