H3C S7500E Series Command Reference Manual page 93

[Sysname-Onu3/0/1:1] display epon-multicast information
Multicast-control information: None.
# Display multicast control information when the multicast mode of the ONU is multicast control mode
and multicast control information is generated.
[Sysname-Onu3/0/1:1] display epon-multicast information
Multicast-control information:
-------------------------------
UNI number 1:
Multicast vlan 10
Current channel list:
multicast ip:225.0.0.2
status:permit
Multicast vlan 10
Current channel list:
multicast ip:225.0.0.3
status:preview
preview times:16
preview remain time:144s
Table 3-2 display epon-multicast information command output description
Field
ONU is not in multicast-control mode.
Multicast-control information: None.
UNI number 1
Multicast vlan 10
Current channel list
multicast ip
status:permit
preview times:16
preview remain time:144s
Description
The multicast control mode of the ONU is IGMP snooping. No
multicast control information is available now.
The multicast control mode of the ONU is multicast control mode
but no multicast control information is generated. There are two
reasons for this:
No multicast control contents are configured.
The multicast client sends no IGMP report message.
UNI port number
Multicasts VLAN number
List of current multicast channels
Multicast IP address of multicast channel
Multicast control policy
permit: Allows access to the corresponding multicast channel
(without time limit).
preview: Allows previewing the corresponding multicast
channel (with time limit)
This is the sixteenth time the corresponding multicast channel
has been previewed.
The channel can be previewed for 144 more seconds before the
preview ends.
3-5