Subvlan - H3C S7500E Series Command Reference Manual

Field
Subnet Mask
Description
Name
Tagged Ports
Untagged Ports

subvlan

Syntax
subvlan vlan-list
undo subvlan [ vlan-list ]
View
VLAN view
Default Level
2: System level
Parameters
vlan-list: Sub-VLAN list, in the format of vlan-list = { vlan-id [ to vlan-id2 }&<1-10>, in which vlan-id
represents the sub-VLAN ID and ranges from 1 to 4094. &<1-10> indicates you can specify up to 10
sub-VLAN IDs or sub-VLAN ID ranges.
Description
Use the subvlan command to associate the super VLAN with the specified sub-VLAN(s).
The current VLAN is the super VLAN whereas the VLANs specified by the vlan-list parameter are the
sub-VLANs.
Use the undo subvlan command to remove the association.
Note:
Ensure that the sub-VLANs already exist before associating them with a super VLAN.
You can add/remove a port to/from a sub-VLAN already associated with a super VLAN.
The undo subvlan command without vlan-list specified removes the association between the
specified super VLAN and all its sub-VLANs, while the undo subvlan command with vlan-list
specified only removes the association between the current super VLAN and the sub-VLANs
specified by vlan-list.
Related commands: display supervlan.
Examples
# Associate VLAN 10 (the super VLAN) with VLAN 3, VLAN 4, VLAN 5, and VLAN 9 (the sub-VLANs).
Subnet mask of the VLAN interface, if configured. This field is not displayed if
no mask is configured for the VLAN interface.
This field is the same for both sub-VLANs and the super VLAN.
VLAN description
VLAN name
Ports through which packets of the VLAN are sent tagged.
Ports through which packets of this VLAN are sent untagged
14-3
Description