Display Stp - H3C S7500E Series Command Reference Manual

begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256
characters.
Description
Use the display stp root command to display the root bridge information of all MSTIs.
Examples
# Display the root bridge information of all MSTIs.
<Sysname> display stp root
MSTID Root Bridge ID
0 0.00e0-fc0e-6554
Table 11-9 display stp root command output description
Field
MSTID
Root Bridge ID
ExtPathCost
IntPathCost
Root Port
display stp tc
Syntax
On a distributed device:
display stp [ instance instance-id ] tc [ slot slot-number ] [ | { begin | exclude | include }
regular-expression ]
On a distributed IRF member device:
display stp [ instance instance-id ] tc [ chassis chassis-number slot slot-number ] [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default Level
0: Visit level
ExtPathCost IntPathCost Root Port
200200 0
MSTI ID
Root bridge ID
External path cost. The device can automatically calculate the default path cost
of a port, or alternatively, you can use the stp cost command to configure the
path cost of a port.
Internal path cost. The device can automatically calculate the default path cost of
a port, or alternatively, you can use the stp cost command to configure the path
cost of a port.
Root port name (displayed only if a port of the current device is the root port of
MSTIs)
11-17
GigabitEthernet2/0/1
Description