6A4-4 ENGINE MECHANICAL (XUD9BSD ENGINE)
OIL FILTER
REMOVAL
1) Remove oil filter using special tool (oil filter wrench).
Special tool
(A): 09915-46510
INSTALLATION
1) Apply engine oil to new oil filter O-ring.
2) Install oil filter and tighten it to specified torque by using special
tool (A).
Special tool
(A): 09915-46510
Tightening torque
(a): 14 N·m (1.4 kg-m)
3) Check engine oil level referring to section 0B.
4) Start engine and check oil filter for oil leakage.
OIL PRESSURE SWITCH
REMOVAL
1) Disconnect oil pressure switch connector.
2) Remove oil pressure switch.
INSTALLATION
1) Install oil pressure switch with new gasket.
2) Tighten oil pressure switch.
Tightening torque
(b): 30 N·m (3.0 kg-m)
3) Connect connector.
4) Start engine and check for oil leakage.
1. Oil pressure switch
2. Gasket