Suzuki Ignis Service Manual page 395

DTC NO. TROUBLE AREA
P0340 CMP SENSOR
(No.15)
P0400 EGR VALVE
P0420 CATALYST
P0443 PURGE CONTROL
VALVE
P0480 RADIATOR FAN
CONTROL SYSTEM
P0500 VEHICLE SPEED
(No.16) SENSOR
P0505 IDLE CONTROL
SYSTEM
P0601 ECM INTERNAL
(No.71)
P1450 BAROMETRIC
(No.29) PRESSURE SEN-
SOR
FAIL-SAFE OPERATION
ECM changes injection control sys-
tem from sequential injection to simul-
taneous one.
–
–
–
–
ECM stops idle air control.
–
–
ECM controls actuators assuming
that barometric pressure is
100 kPa (760 mmHg).
ENGINE GENERAL INFORMATION AND DIAGNOSIS 6-21
SYMPTOM
Hard starting
Hard starting/rough or incorrect
idle/ excessive fuel consumption/
hesitation/ poor acceleration/
surge/ detonation or spark knock/
engine stall
Rough or incorrect idle/ surge/
hard starting/ engine stall
Engine overheating
Rough or incorrect idle
Engine stall/ rough or incorrect idle
Hard starting/ rough or incorrect
idle/ excessive fuel consumption/
detonation or spark knock/ hesita-
tion poor acceleration/
Hard starting/ rough or incorrect
idle
–