Volkswagen Passat 1995 Official Factory Repair Manual page 3828

Sliding/tilting roof with glass panel
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.BD01.60.2
Panel seal, adjusting
- Using a 0,3 mm thick paper strip (business card),
check that pre-tension between panel seal -1- and
body -4- is uniform all-around. It must be possible
for paper strip to be pulled through under tension.
- If pre-tension is not enough, push panel seal apart
using a wedge -3-. If pre-tension is too high, press
it together. To adjust panel seal, glass panel -2-
must be removed.
Page 6 of 15
60-26
12/7/2004