Volkswagen Passat 1995 Official Factory Repair Manual page 3862

Flush-bonded windows
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.BD01.64.1
- If gap is too small, guide cutting thread from
outside and push under lip with a plastic wedge.
- Place cutting thread around window as shown.
Note:
Press in cutting thread deep enough to avoid
damaging sealing lip or spacer lip.
- Secure outer end of thread on window wiper shaft
or pull thread through toward inside and counter-
hold with handle VAG1351/1.
- Disconnect heated rear window and press
connecting tabs onto window.
GL and GT only
- Unclip trim panels on left and right parallel to rear
window.
Page 18 of 28
64-18
12/7/2004