Volkswagen Passat 1995 Official Factory Repair Manual page 3818

Sliding/tilting roof
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.BD01.60.1
Sliding/tilting roof assembly, removing
- Disconnect battery ground cable.
- Unclip interior light.
- Remove screws -1- and -2- and disengage cover
for cable drive in direction of arrow.
Note:
Screw -1- also secures bracket -3-.
- Pull beading off molded headliner cut-out. To help
in installation of replacement part, beading comes
with a cord in clamping channel.
Notes:
When installing, a space remains in the area of
the cable drive. a
The space is marked by notches in the frame.
- Remove trim on A-pillar, top of B-pillar, top of C-
pillar and D-pillar.
- Remove headliner.
Page 16 of 20
180 mm.
60-16
12/7/2004