Volkswagen Passat 1995 Official Factory Repair Manual page 3833

Sliding/tilting roof with glass panel
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.BD01.60.2
Parallel alignment, adjusting
Glass panel must be closed.
- Disconnect battery ground cable.
- Fully push back sliding headliner and trim
frame.
- Remove cover for cable drive.
- Remove cable drive assembly. Always use new
screws (coated) when installing cable drive 3
Nm (27 in. lb).
Note:
The drive pinion must no longer be engaged in
the drive cables.
- Push rear guides only from the rear onto notches
(arrows).
Pins -3- must be positioned within notches (arrows).
Hooks -4- must be engaged in guide rails.
Page 11 of 15
60-31
12/7/2004