Volkswagen Passat 1995 Official Factory Repair Manual page 3859

Flush-bonded windows
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.BD01.64.1
Undamaged window, removing
- Place winding device VAG1654 in position 1.
- Attach ends of thread (yellow) to winding device.
- Move winding device to various positions and cut
out window up to position 3.
- Cut position 4 with other thread end.
- Cut through remaining adhesive, positions 1 - 3.
- Cut away positions 4 and 5 with other free end of
thread.
Note:
If you cannot remove the rear window from the
opening (adhesive has spread to the outside
beyond the thread channel) it is best to cut
through the remaining adhesive with a piece of
cutting thread using two toggles to prevent
damage to the paint.
Always guide cutting thread below the window
surround.
Page 15 of 28
64-15
12/7/2004