Volkswagen Passat 1995 Official Factory Repair Manual page 3812

Sliding/tilting roof
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.BD01.60.1
Page 10 of 20
Parallel alignment,
checking and adjusting
Checking and adjusting can be
done with installed panel and
pushed back panel liner.
- Disconnect battery ground
cable
- Unclip interior light and
remove cover for cable
drive.
- Remove cable drive (screws
are coated). Before
installing, clean threads with
wire brush and coat with
locking fluid D 185 400 A 2.
- Tightening torque = 3 Nm
(27 in. lb).
Note:
The drive gear must not be
engaged with the cables.
60-10
12/7/2004