To Start The System; Troubleshooting System Initialization; Vrc Front Panel Led Description; Nic And Tms System Alarm Monitoring - Avaya Media Processing Server 1000 Hardware Installation And Maintenance

Operation and Administration

To Start the system

Run the following command: /etc/rc3.d/S20vps.startup start

Troubleshooting System Initialization

VRC Front Panel LED Description

The following table lists the possible VRC front panel LED combinations.
POWER NORMAL
1
OFF
ON
ON
ON
ON
ON
ON
1. If the power switch for TMS slot is off then all LEDs are off.

NIC and TMS System Alarm Monitoring

System alarms help detect faults and isolate NIC and TMS hardware or software components. Any
fault detected that affects the call-processing ability of a module generates a system alarm. Alarms
are announced to the Alarm Viewer and the front panel LEDs on a VRC chassis. Alarms are stored
for retrieval can be viewed through MPS Manager.
Avaya Media Processing Server 1000 Hardware Installation and Maintenance
172
VRC LED Description
MINOR
ALARM
OFF OFF
OFF OFF
ON OFF
OFF ON
OFF OFF
OFF ON
ON ON
Comments? infodev@avaya.com
MAJOR
ALARM
OFF Card is OFF. No power detected
OFF Power switch for slot is on, NIC not
running to enable other LEDs
OFF Normal operation no alarm conditions
exist
OFF One or more minor alarm conditions exist
for device in specified slot
ON One or more major alarm conditions exist
for device in specified slot
ON One or more minor and major alarm
conditions exist for device in specified slot
ON Unique condition to TMS. Indicates that
the board is loading or configuring and is
not available for call processing at this
time.
Description
October 2014