Parameter Set-Up; Quick Menu Key Functions - Danfoss VLT AQUA Drive FC 202 Programming Manual

How to Program
Status screen I
This readout state is standard after start-up or initialization.
2 2 Press [Info] to obtain information about the measurement
links to the shown operating variables (1.1, 1.2, 1.3, 2 and
3).
See the operating variables shown in Illustration 2.11.
Illustration 2.11 Status Screen I
Status screen II
See the operating variables (1.1, 1.2, 1.3, and 2) shown in
Illustration 2.12.
In the example, speed, motor current, motor power, and
frequency are selected as variables in the first 2 lines.
Illustration 2.12 Status Screen II
Status screen III
This state shows the event and action of the smart logic
control. For more information, see parameter group 13-**
Smart Logic.
Illustration 2.13 Status Screen III
18
Status
799 RPM 7.83 A
1.1
0.000
1.2
53.2 %
Auto Remote Ramping
2
3
1.3
Status
207RPM 5.25A
1.1
6.9
Hz
Auto Remote Running
Status
778 RPM 0.86 A
State: 0 o 0 (o )
When: -
Do: -
Auto Remote Running
Danfoss A/S © 05/2018 All rights reserved.
®
VLT AQUA Drive FC 202

2.2.5 Parameter Set-up

The frequency converter can be used for practically all
assignments and offers 2 programming mode options:
•
•
Main menu provides access to all parameters. Quick menu
1 (1)
36.4 kw
takes the user through a few parameters, making it
possible to start operating the frequency converter.
Change a parameter in either main menu mode or quick
menu mode.

2.2.6 Quick Menu Key Functions

Press [Quick Menu] to enter a list of different areas
contained in the Quick Menu.
Select Q1 My Personal Menu to show the selected personal
parameters. These parameters are selected in
parameter 0-25 My Personal Menu. Up to 50 different
parameters can be added in this menu.
1 (1)
24.4 kW
1.3
Illustration 2.14 Quick Menus
1.2
2
Select Q2 Quick Setup to go through a selection of
parameters to get the motor running almost optimally. The
default settings for the other parameters consider the
required control functions and the configuration of signal
inputs/outputs (control terminals).
The parameter selection is effected with the navigation
keys. The parameters in Table 2.1 are accessible.
1 (1)
4.0 kW
Main menu mode.
Quick menu mode.
0RPM 0.00A
Quick Menus
Q1 My Personal Menu
Q2 Quick Setup
Q4 Smart Setup
Q5 Changes Made
1(1)
MG20OB02