Danfoss VLT AQUA Drive FC 202 Programming Manual page 149

Parameter Description
3.14.9 15-4* Drive Identification
Parameters containing read-only information about the
hardware and software configuration of the frequency
converter.
15-40 FC Type
Range: Function:
0 N/A [0 - 0 N/A] View the FC type. The readout is identical
*
to the power field of the type code
definition, characters 1–6.
15-41 Power Section
Range: Function:
0 N/A [0 - 0 N/A] View the FC type. The readout is identical
*
to the power field of the type code
definition, characters 7–10.
15-42 Voltage
Range: Function:
0 N/A [0 - 0 N/A] View the FC type. The readout is identical
*
to the power field of the type code
definition, characters 11–12.
15-43 Software Version
Range: Function:
0 [0 - 5 ] View the combined SW version (or package
*
version) consisting of power SW and control SW.
15-44 Ordered Typecode String
Range: Function:
0 [0 - 40 ] View the type code string used for reordering the
*
frequency converter in its original configuration.
15-45 Actual Typecode String
Range: Function:
0 [0 - 40 ] View the actual type code string.
*
15-46 Frequency Converter Ordering No
Range: Function:
0 [0 - 8 ] View the 8-digit ordering number used for
*
reordering the frequency converter in its original
configuration. To restore the ordering number after
the power card exchange, see
parameter 14-29 Service Code.
15-47 Power Card Ordering No
Range: Function:
0 [0 - 8 ] View the power card ordering number.
*
15-48 LCP Id No
Range: Function:
0 [0 - 20 ] View the LCP ID number.
*
MG20OB02
Programming Guide
15-49 SW ID Control Card
Range:
0 [0 - 20 ]
*
15-50 SW ID Power Card
Range:
0 [0 - 20 ]
*
15-51 Frequency Converter Serial Number
Range:
0 [0 - 10 ]
*
15-53 Power Card Serial Number
Range:
0 [0 - 19 ]
*
15-54 Config File Name
Array [5]
Range:
Size related
15-58 SmartStart Filename
Range:
Size related
15-59 Filename
Range:
Size related
3.14.10 15-6* Option Ident.
This read-only parameter group contains information about
the hardware and software configuration of the options
installed in slots A, B, C0, and C1.
15-60 Option Mounted
Array [8]
Range:
0 [0 - 30 ]
*
15-61 Option SW Version
Array [8]
Range:
0 [0 - 20 ]
*
Danfoss A/S © 05/2018 All rights reserved.
Function:
View the control card software version number.
Function:
View the power card software version number.
Function:
View the frequency converter serial number.
Function:
View the power card serial number.
Function:
[0 - 16 ] Shows the special configuration
*
filenames.
Function:
[0 - 20 ] Shows the SmartStart filename.
*
Function:
[0 - 16 ] Shows the currently used CSIV
*
(costumer-specific initial values)
filename.
Function:
Shows the type of the installed option.
Function:
View the installed option software version.
3 3
147