Danfoss VLT AQUA Drive FC 202 Programming Manual page 150

Parameter Description
15-62 Option Ordering No
Array [8]
Range:
0 [0 - 8 ] Shows the ordering number for the installed
*
3 3
15-63 Option Serial No
Array [8]
Range:
0 [0 - 18 ]
*
15-70 Option in Slot A
Range:
0 [0 - 30 ] View the type code string for the option installed
*
15-71 Slot A Option SW Version
Range:
0 [0 - 20 ] View the software version for the option installed
*
15-72 Option in Slot B
Range:
0 [0 - 30 ] View the type code string for the option installed
*
15-73 Slot B Option SW Version
Range:
0 [0 - 20 ] View the software version for the option installed
*
15-74 Option in Slot C0/E0
Range:
0 [0 - 30 ] View the type code string for the option installed
*
15-75 Slot C0/E0 Option SW Version
Range:
0 [0 - 20 ] View the software version for the option installed
*
15-76 Option in Slot C1/E1
Range:
0 [0 - 30 ] Shows the type code string for the options
*
148
Function:
options.
Function:
View the installed option serial number.
Function:
in slot A, and a translation of the type code string.
For example, type code string AX means no
option.
Function:
in slot A.
Function:
in slot B, and a translation of the type code string.
For example, for type code string BX, the
translation is No option.
Function:
in slot B.
Function:
in slot C, and a translation of the type code string.
For example, type code string CXXXX means no
option.
Function:
in slot C.
Function:
(CXXXX if there is no option).
Danfoss A/S © 05/2018 All rights reserved.
®
VLT AQUA Drive FC 202
15-77 Slot C1/E1 Option SW Version
Range:
0 [0 - 20 ] Software version for the installed option in option
*
15-80 Fan Running Hours
Range:
0 h [0 - 2147483647 h] This parameter shows how many
*
3.14.11 15-9* Parameter Info
15-92 Defined Parameters
Range:
0 [0 - 9999 ] View a list of all defined parameters in the
*
15-93 Modified Parameters
Range:
0 [0 - 9999 ] View a list of the parameters that have been
*
15-98 Drive Identification
Range:
0
*
15-99 Parameter Metadata
Array [30]
Range:
0 [0 - 9999 ] This parameter contains data used by the MCT
*
Function:
slot C.
Function:
hours the external fan has run. The
value is saved when the frequency
converter is turned off.
Function:
frequency converter. The list ends with 0.
Function:
changed from their default setting. The list ends
with 0. Changes may not be visible until up to
30 s after implementation.
Function:
[0 - 40 ]
Function:
10 Set-up Software tool.
MG20OB02