Danfoss VLT AQUA Drive FC 202 Programming Manual page 110

Parameter Description
8-52 DC Brake Select
Option:
3 3
[0] Digital
input
[1] Bus
[2] Logic
AND
[3] Logic OR Activates start command via the fieldbus/serial
8-53 Start Select
Select the trigger for the start function.
Option:
[0] Digital input A digital input triggers the start function.
[1] Bus
[2] Logic AND
[3] Logic OR
*
8-54 Reversing Select
Select control of the frequency converter reverse function via the
terminals (digital input) and/or via the fieldbus.
Option:
[0] Digital input Activates reverse command via a digital input.
*
[1] Bus
[2] Logic AND
[3] Logic OR
108
Function:
NOTICE
Only selection [0] Digital Input is available
when parameter 1-10 Motor Construction is
set to [1] PM, non-salient SPM.
Activates start command via a digital input.
Activates start command via the serial communi-
cation port or fieldbus option.
Activates start command via the fieldbus/serial
communication port AND via 1 of the digital
inputs.
communication port OR via 1 of the digital inputs.
Function:
A serial communication port or the fieldbus
triggers the start function.
The fieldbus/serial communication port and a
digital input trigger the start function.
The fieldbus/serial communication port or a
digital input triggers the start function.
Function:
NOTICE
This parameter is active only when
parameter 8-01 Control Site is set to [0]
Digital and control word.
Activates reverse command via the serial
communication port or fieldbus option.
Activates reverse command via the fieldbus/
serial communication port and via 1 of the
digital inputs.
Activates reverse command via the fieldbus/
serial communication port or via 1 of the
digital inputs.
Danfoss A/S © 05/2018 All rights reserved.
®
VLT AQUA Drive FC 202
MG20OB02