Brakes - Danfoss VLT AQUA Drive FC 202 Programming Manual

Parameter Lists

4.1.4 2-** Brakes

Param- Parameter description
eter #
2-0* DC-Brake
2-00 DC Hold/Preheat Current
2-01 DC Brake Current
2-02 DC Braking Time
2-03 DC Brake Cut In Speed [RPM]
2-04 DC Brake Cut In Speed [Hz]
2-06 Parking Current
2-07 Parking Time
2-1* Brake Energy Funct.
2-10 Brake Function
2-11 Brake Resistor (ohm)
2-12 Brake Power Limit (kW)
2-13 Brake Power Monitoring
2-15 Brake Check
2-16 AC brake Max. Current
2-17 Over-voltage Control
MG20OB02
Programming Guide
Default value 4 set-up
50% All set-ups
50% All set-ups
10 s All set-ups
ExpressionLimit All set-ups
ExpressionLimit All set-ups
50% All set-ups
3 s All set-ups
ExpressionLimit All set-ups
ExpressionLimit All set-ups
ExpressionLimit All set-ups
[0] Off All set-ups
[0] Off All set-ups
100% All set-ups
[2] Enabled All set-ups
Danfoss A/S © 05/2018 All rights reserved.
Change during Conversion
operation index
TRUE 0
TRUE 0
TRUE -1
TRUE 67
TRUE -1
TRUE 0
TRUE -1
TRUE -
TRUE 0
TRUE 0
TRUE -
TRUE -
TRUE -1
TRUE -
Type
Uint8
Uint16
Uint16
4 4
Uint16
Uint16
Uint16
Uint16
Uint8
Uint16
Uint32
Uint8
Uint8
Uint32
Uint8
253