Danfoss VLT AQUA Drive FC 202 Programming Manual page 38

Parameter Description
0-43 [Reset] Key on LCP
Option:
[0] Disabled
[1] Enabled
*
3 3
[2] Password
[3] Enabled
without OFF
[4] Password
without OFF
[5] Enabled with
OFF
[6] Password
with OFF
0-44 [Off/Reset] Key on LCP
Enable or disable the [Off/Reset] key.
Option:
[0]
[1]
*
[2]
0-45 [Drive Bypass] Key on LCP
Press [Off] and select [0] Disabled to avoid unintended stop of
the frequency converter. Press [Off] and select [2] Password to
avoid unauthorized bypass of the frequency converter. If
parameter 0-45 [Drive Bypass] Key on LCP is included in the Quick
Menu, define the password in parameter 0-65 Personal Menu
Password.
Option:
[0]
[1]
*
[2]
36
VLT
Function:
Select to disable the key.
[Reset] key is enabled.
Avoid unauthorized resetting. If
parameter 0-43 [Reset] Key on LCP is included
in parameter 0-25 My Personal Menu, define
the password in parameter 0-65 Personal
Menu Password. Otherwise, define the
password in parameter 0-60 Main Menu
Password.
Pressing the key resets the frequency
converter, but does not start it.
Prevents unauthorized reset. After authorized
reset, the frequency converter does not
start. See option [2] Password for information
on how to set the password.
Function:
Disabled
Enabled
Password
Function:
Disabled Select to disable the
key.
Enabled
Password
Danfoss A/S © 05/2018 All rights reserved.
®
AQUA Drive FC 202
3.2.6 0-5* Copy/Save
Copy parameters from and to the LCP. Use these
parameters for saving and copying set-ups from 1
frequency converter to another.
0-50 LCP Copy
Option:
[0] No copy
*
[1] All to LCP
[2] All from LCP Copies all parameters in all set-ups from the
[3] Size indep.
from LCP
[10] Delete LCP
copy data
0-51 Set-up Copy
Option:
[0] No copy
*
[1] Copy to
set-up 1
[2] Copy to
set-up 2
[3] Copy to
set-up 3
[4] Copy to
set-up 4
[9] Copy to
all
Function:
NOTICE
This parameter cannot be adjusted
while the motor is running.
Copies all parameters in all set-ups from the
frequency converter memory to the LCP
memory. For service purposes, copy all
parameters to the LCP after commissioning.
LCP memory to the frequency converter
memory.
Copies only the parameters that are
independent of the motor size. Use the latest
selection to program several frequency
converters with the same function without
disturbing motor data which is already set.
Function:
No function.
Copies all parameters in the present
programming set-up (defined in
parameter 0-11 Programming Set-up) to set-up 1.
Copies all parameters in the present
programming set-up (defined in
parameter 0-11 Programming Set-up) to set-up 2.
Copies all parameters in the present
programming set-up (defined in
parameter 0-11 Programming Set-up) to set-up 3.
Copies all parameters in the present
programming set-up (defined in
parameter 0-11 Programming Set-up) to set-up 4.
Copies the parameters in the present set-up to
each of the set-ups 1 to 4.
MG20OB02