Danfoss VLT AQUA Drive FC 202 Programming Manual page 178

Parameter Description
21-59 Ext. 3 Output [%]
Range:
0 % [0 - 100 %] See parameter 21-19 Ext. 1 Output [%] for
*
3 3
3.18.7 21-6* Closed Loop 3 PID
21-60 Ext. 3 Normal/Inverse Control
Option:
[0] Normal
*
[1] Inverse
21-61 Ext. 3 Proportional Gain
Range:
0.50 [0 - 10 ] See parameter 21-21 Ext. 1 Proportional Gain for
*
21-62 Ext. 3 Integral Time
Range:
20 s [0.01 - 10000 s] See parameter 21-22 Ext. 1 Integral Time
*
21-63 Ext. 3 Differentation Time
Range:
0 s [0 - 10 s] See parameter 21-23 Ext. 1 Differentation Time for
*
21-64 Ext. 3 Dif. Gain Limit
Range:
5 [1 - 50 ] See parameter 21-24 Ext. 1 Dif. Gain Limit for
*
21-66 Ext. 3 On Reference Bandwidth
Range:
5 % [0 - 200 %] Enter the on-reference bandwidth. When the
*
176
Function:
details.
Function:
See parameter 21-20 Ext. 1 Normal/Inverse Control
for details.
Function:
details.
Function:
for details.
Function:
details.
Function:
details.
Function:
PID control error (the difference between the
reference and the feedback) is less than the
value of this parameter, the on-reference
status bit is high.
Danfoss A/S © 05/2018 All rights reserved.
®
VLT AQUA Drive FC 202
MG20OB02