Parameter Set-Up; Quick Menu Key Functions - Danfoss VLT AutomationDrive FC 301 Programming Manual

How to Programme
Operating variable
16-63 Terminal 54 Switch Setting
16-64 Analog Input 54
16-65 Analog Output 42 [mA]
16-66 Digital Output [bin]
16-67 Pulse Input #29 [Hz]
16-68 Freq. Input #33 [Hz]
16-69 Pulse Output #27 [Hz]
16-70 Pulse Output #29 [Hz]
16-71 Relay Output [bin]
16-72 Counter A
16-73 Counter B
16-80 Fieldbus CTW 1
16-82 Fieldbus REF 1
16-84 Comm. Option STW
16-85 FC Port CTW 1
16-86 FC Port REF 1
16-90 Alarm Word
16-92 Warning Word
16-94 Ext. Status Word
Table 2.1 Measurements
Status Screen I
This read-out state is standard after start-up or initiali-
sation.
Press [Info] to obtain information about the measurement
links to the displayed operating variables (1.1, 1.2, 1.3, 2
and 3).
See the operating variables shown in Illustration 2.10.
Status
799 RPM
1.1
1.2
Auto Remote Ramping
2
3
Illustration 2.10 Status screen I
Status Screen II
See the operating variables (1.1, 1.2, 1.3 and 2) shown in
Illustration 2.11.
In the example, speed, motor current, motor power and
frequency are selected as variables in the first and second.
®
VLT AutomationDrive FC 301/302 Programming Guide
Unit
V
[mA]
[bin]
[Hz]
[Hz]
[Hz]
[Hz]
hex
hex
hex
hex
hex
1 (1)
7.83 A 36.4 kw
0.000
53.2 %
1.3
MG33MH02 - Rev. 2013-09-30
Status
207RPM
1.1
Auto Remote Running
Illustration 2.11 Status screen II
Status Screen III
This state displays the event and action of the Smart Logic
Control. For further information, see 3.14 Parameters: 13-**
Smart Logic Control.
Status
778 RPM
State: 0 o 0 (o )
When: -
Do: -
Auto Remote Running
Illustration 2.12 Status screen III

2.1.5 Parameter Set-Up

The frequency converter can be used for practically all
assignments. The frequency converter offers a choice
between 2 programming modes - a Main Menu and a
Quick Menu mode.
The former provides access to all parameters. The latter
takes the user through a few parameters making it
possible to start operating the frequency converter.
Change a parameter in either Main Menu mode or Quick
Menu mode.

2.1.6 Quick Menu Key Functions

Pres [Quick Menus] to see a list of different areas
contained in the Quick menu.
Select My Personal Menu to display the selected personal
parameters. These parameters are selected in 0-25 My
Personal Menu. Up to 50 different parameters can be
added in this menu.
1 (1)
5.25A 24.4 kW
6.9
Hz
1.3
1.2
2
1 (1)
0.86 A 4.0 kW
15
2 2