Danfoss VLT AQUA Drive FC 202 Programming Manual page 37

Parameter Description
0-37 Display Text 1
Range: Function:
0 [0 - In this parameter, it is possible to write an individual
*
25 ] text string to be shown in the LCP or to be read via
serial communication.
To show the text permanently, select [37] Display Text
1 in 1 of the following parameters:
•
Parameter 0-20 Display Line 1.1 Small.
•
Parameter 0-21 Display Line 1.2 Small.
•
Parameter 0-22 Display Line 1.3 Small.
•
Parameter 0-23 Display Line 2 Large.
•
Parameter 0-24 Display Line 3 Large.
•
Parameter 0-37 Display Text 1.
Changing parameter 12-08 Host Name changes
parameter 0-37 Display Text 1 - but not the opposite
way.
0-38 Display Text 2
Range: Function:
0 [0 - In this parameter, it is possible to write an individual
*
25 ] text string to be shown in the LCP or to be read via
serial communication.
To show the text permanently, select [38] Display Text
2 in:
•
Parameter 0-20 Display Line 1.1 Small.
•
Parameter 0-21 Display Line 1.2 Small.
•
Parameter 0-22 Display Line 1.3 Small.
•
Parameter 0-23 Display Line 2 Large.
•
Parameter 0-24 Display Line 3 Large.
▲ ▼
Press [ ] or [ ] to change a character. Press [
▶
[ ] to move the cursor. When a character is
highlighted by the cursor, this character can be
changed. A character can be inserted by placing the
cursor between 2 characters and pressing [
0-39 Display Text 3
Range: Function:
0 [0 - In this parameter, it is possible to write an individual
*
25 ] text string to show in the LCP or to be read via
serial communication. To show the text permanently,
select display text 3 in parameter 0-20 Display Line
1.1 Small, parameter 0-21 Display Line 1.2 Small,
parameter 0-22 Display Line 1.3 Small,
parameter 0-23 Display Line 2 Large, or
parameter 0-24 Display Line 3 Large. Press [
to change a character. Press [
cursor. When a character is highlighted by the
cursor, this character can be changed. A character
can be inserted by placing the cursor between 2
characters and pressing [
MG20OB02
Programming Guide
◀
] and
▲ ▼
] or [ ].
▲ ▼
] or [ ]
◀ ▶
] and [ ] to move the
▲ ▼
] or [ ].
Danfoss A/S © 05/2018 All rights reserved.
3.2.5 0-4* LCP Keypad
Enable, disable, and password protect individual keys on
the LCP.
0-40 [Hand on] Key on LCP
Option: Function:
[0] Disabled Select to disable the key.
[1] Enabled [Hand On] key is enabled.
*
[2] Password Avoid unauthorized start in hand-on
mode. If parameter 0-40 [Hand on] Key on
LCP is included in My Personal Menu,
define the password in
parameter 0-65 Personal Menu Password.
Otherwise, define the password in
parameter 0-60 Main Menu Password.
[3] Enabled without
OFF
[4] Password
without OFF
[5] Enabled with
OFF
[6] Password with
OFF
[9] Enabled, ref = 0
0-41 [Off] Key on LCP
Option: Function:
[0] Disabled Select to disable the key.
[1] Enabled [Off] key is enabled.
*
[2] Password Avoid unauthorized stop. If parameter 0-41 [Off]
Key on LCP is included in My Personal Menu,
define the password in parameter 0-65 Personal
Menu Password. Otherwise, define the password
in parameter 0-60 Main Menu Password.
0-42 [Auto on] Key on LCP
Option: Function:
[0] Disabled Select to disable the key.
[1] Enabled [Auto On] key is enabled.
*
[2] Password Avoid unauthorized start in auto-on mode. If
parameter 0-42 [Auto on] Key on LCP is included
in My Personal Menu, define the password in
parameter 0-65 Personal Menu Password.
Otherwise, define the password in
parameter 0-60 Main Menu Password.
3 3
35