Danfoss VLT AQUA Drive FC 202 Programming Manual page 35

Parameter Description
0-20 Display Line 1.1 Small
Option: Function:
[9914] Paramdb
requests in
queue
[9920] HS Temp. (PC1)
[9921] HS Temp. (PC2)
[9922] HS Temp. (PC3)
[9923] HS Temp. (PC4)
[9924] HS Temp. (PC5)
[9925] HS Temp. (PC6)
[9926] HS Temp. (PC7)
[9927] HS Temp. (PC8)
0-21 Display Line 1.2 Small
The options are the same as those listed for
parameter 0-20 Display Line 1.1 Small. Select a variable to show in
line 1, center position.
0-22 Display Line 1.3 Small
The options are the same as those listed for
parameter 0-20 Display Line 1.1 Small. Select a variable to show in
line 1, right position.
0-23 Display Line 2 Large
The options are the same as those listed for
parameter 0-20 Display Line 1.1 Small. Select a variable to show in
line 2.
0-24 Display Line 3 Large
The options are the same as those listed for
parameter 0-20 Display Line 1.1 Small. Select a variable to show in
line 2.
0-25 My Personal Menu
Array [50]
Range: Function:
0 [0 - Define up to 20 parameters to appear in the Q1
N/A 9999 Personal Menu, accessible via the [Quick Menu]
*
N/A] key on the LCP. The parameters are shown in
the Q1 Personal Menu in the order they are
programmed into this array parameter. Delete
parameters by setting the value to 0000.
For example, this can be used to provide quick,
simple access to just 1 or up to 50 parameters
which require changing regularly.
MG20OB02
Programming Guide
3.2.4 0-3* LCP Custom Readout
It is possible to customize the display elements for various
purposes:
•
•
Custom readout
The calculated value to be shown is based on the settings
in:
•
•
•
•
•
•
Custom Readout (Value)
P 16-09
Custom Readout
Unit P 0-30
Max value
P 0-32
Min value
Linear
units only
P 0-31
Illustration 3.3 Custom Readout
Danfoss A/S © 05/2018 All rights reserved.
Custom readout. Value proportional to speed
(linear, squared, or cubed depending on unit
selected in parameter 0-30 Custom Readout Unit).
Display text. Text string stored in a parameter.
Parameter 0-30 Custom Readout Unit.
Parameter 0-31 Custom Readout Min Value (linear
only).
Parameter 0-32 Custom Readout Max Value.
Parameter 4-13 Motor Speed High Limit [RPM].
Parameter 4-14 Motor Speed High Limit [Hz].
Actual speed.
0
3
Motor Speed
Motor Speed
High limit
P 4-13 (RPM)
P 4-14 (Hz)
33
3