Danfoss VLT AQUA Drive FC 202 Programming Manual page 40

Parameter Description
0-71 Date Format
Option:
[0] YYYY-MM-DD
[1] DD-MM-YYYY
3 3
[2] MM/DD/YYYY
0-72 Time Format
Option: Function:
Sets the time format to be used in the LCP.
[0] 24 h
[1] 12 h
0-73 Time Zone Offset
Range:
0 min [-780 - 780
*
min]
0-74 DST/Summertime
Option:
[0] Off
*
[2] Manual
0-76 DST/Summertime Start
Range:
Size
related
*
0-77 DST/Summertime End
Range:
Size
related
*
0-79 Clock Fault
Option:
[0] Disabled
[1] Enabled
38
Function:
Sets the date format to be used in the LCP.
Sets the date format to be used in the LCP.
Sets the date format to be used in the LCP.
Function:
Enter the time zone offset relative to
UTC. This parameter is required for the
automatic daylight saving time
adjustment.
Function:
Select how to handle daylight saving time/summer
time. For manual setting of DST/summer time,
enter the start date and end date in
parameter 0-76 DST/Summertime Start and
parameter 0-77 DST/Summertime End.
Function:
[ 0 - 0 ] Sets the date and time when DST/
summer time starts. The date is
programmed in the format selected in
parameter 0-71 Date Format.
Function:
[ 0 - 0 ] Sets the date and time when DST/
summer time ends. The date is
programmed in the format selected in
parameter 0-71 Date Format.
Function:
Enables or disables the clock warning when the
clock has not been set, or has been reset due to a
power-down and no back-up is installed. If VLT
Analog I/O Option MCB 109 is installed, [1] Enabled
is default.
Danfoss A/S © 05/2018 All rights reserved.
®
VLT AQUA Drive FC 202
0-81 Working Days
Array [7]
Array with 7 elements [0]–[6] shown below the parameter
number in the display. Press [OK] and step between elements
▲
with [
Option: Function:
[0] No
[1] Yes
0-82 Additional Working Days
Array [5]
Array with 5 elements [0]–[4] shown below the parameter
number in the display. Press [OK] and step between elements
▲
with [
Range:
Size related
0-83 Additional Non-Working Days
Array [15]
Array with 15 elements [0]–[14] shown below the parameter
number in the display. Press [OK] and step between elements
▲
with [
Range:
Size related
0-84 Time for Fieldbus
Range:
0 [0 - 4294967295 ]
*
0-85 Summer Time Start for Fieldbus
Range:
0 [0 - 4294967295 ] Shows the summer time start for
*
0-86 Summer Time End for Fieldbus
Range:
0 [0 - 4294967295 ] Shows the summer time end for fieldbus.
*
®
▼
] and [ ].
Set for each weekday if it is a working day or a non-
working day. First element of the array is Monday. The
working days are used for timed actions.
▼
] and [ ].
Function:
[ 0 - 0 ] Defines dates for additional working days
*
that would normally be non-working
days according to parameter 0-81 Working
Days.
▼
] and [ ].
Function:
[ 0 - 0 ] Defines dates for additional working days
*
that would normally be non-working
days according to parameter 0-81 Working
Days.
Function:
Shows the time for fieldbus.
Function:
fieldbus.
Function:
MG20OB02