Keyless Entry Control Module - Subaru 2003 LEGACY Service Manual

KEYLESS ENTRY CONTROL MODULE

SECURITY AND LOCKS
22.Keyless Entry Control Mod-
ule
A: REMOVAL
1) Disconnect ground cable from battery.
2) Remove glove box. <Ref. to EI-32, REMOVAL,
Glove Box.>
3) Remove nut, then remove keyless entry control
module (B) and the other electrical control module
(A) while disconnecting connector.
( B )
( A )
SL-00102
4) Disconnect keyless entry control module and the
other electrical control module.
B: INSTALLATION
Install in the reverse order of removal.
SL-38