Manual Standby Fields; Manual Boost Fields - Husky Altanium Matrix2 User Manual

7.5.4 Manual Standby Fields

Temperature Setpoint
Temperature Minimum
Temperature Maximum
Power Setpoint
Power Minimum
Power Maximum

7.5.5 Manual Boost Fields

Temperature Setpoint
Temperature Minimum
Temperature Maximum
Power Setpoint
Power Minimum
Power Maximum
68
v 1.1 — July 2015
Item
The temperature all zones are set to when the Standby button is
touched. This setting can be used to lower all zone temperatures to their
manual standby temperature setpoint until the timer expires or the user
touches the Standby button again. Possible values are 0 to 500°C or 32 to
932°F. The default value is 121°C or 250°F.
Limits the range that can be entered for Standby temperature.
The power output all zones are set to when the Standby button is
touched. This setting can be used to lower all zone power setpoints to
their manual standby power setpoint until the timer expires or the user
touches the Standby button again. Possible values are 0% – 100%. The
default value is 10%.
Limits the range that can be entered for Standby power.
Item
The temperature all zones are set to when the Boost button is touched.
This setting raises all zones to their manual boost setpoint until the timer
expires or the user touches the Boost button again. Possible values are 0
to 500°C or 32 to 932°F. The default value is No Change.
Limits the range that can be entered for Boost Temperature.
The power values all zones are set to when the Boost button is touched.
This setting raises all zones to their manual boost setpoint until the timer
expires or the user touches the Boost button again. Possible values are
0% – 100%. The default value is 90%.
Limits the range that can be entered for Boost power.
Description
Description
Manual Standby Fields
Altanium Matrix2