Calibrating The Thermocouple Inputs - Husky Altanium Matrix2 User Manual

3.
Figure 15-13 Motherboard
1. Motherboard Battery
CAUTION!
Mechanical hazard - risk of equipment damage. Install the same size and type of
battery. Installing the wrong size or type of battery could cause equipment damage.
4.
5.
6.

15.6 Calibrating the Thermocouple Inputs

The system has been factory-calibrated and in most cases it is not necessary to recalibrate
until Altanium has been running for one year. If calibration is necessary, contact the nearest
Husky Regional Service and Sales office for calibration instructions.
186
Remove and discard the motherboard battery.
Install the new motherboard battery. The positive (+) side faces outwards.
Install the display module back cover.
Connect the power.
v 1.1 — July 2015
1
Altanium Matrix2
Calibrating the Thermocouple Inputs