Setting The Remote Boost Delay Timer; Changing The Remote Boost Input Mode; Boost Operation Description - Husky Altanium Matrix2 User Manual

User Guide
To set the remote boost duration timer, do the following:
1.
2.
3.

10.1.8.3 Setting the Remote Boost Delay Timer

Use the remote boost delay timer to wait for a specified period before entering boost.
To set the remote boost delay timer, do the following:
1.
2.
3.

10.1.8.4 Changing the Remote Boost Input Mode

The remote boost input mode setting is enabled based on one of three settings: trigger,
on/off, or direct.
To change the Boost Input, do the following:
1.
2.
NOTE:

10.1.8.5 Boost Operation Description

Table 10-4 Manual Boost Operational Description
Manual
Time
0:00:00
X:XX:XX
Manual Boost can be cancelled at any time by touching the Start or Stop buttons.
Setting the Remote Boost Delay Timer
On the System Setup screen, under Remote Boost, touch the Remote Boost Duration
Timer field.
Enter the time required in the format HHMMSS
Touch the Accept button.
On the System Setup screen, under Remote Boost, touch the Remote Boost Delay
Timer field.
Enter the time required in the format HHMMSS.
Touch the Accept button.
On the System Setup screen, under Remote Boost, touch the Remote Boost Input
Mode field.
Select the desired setting.
If the system is not equipped with remote boost, the Remote Boost Input Mode field
will not appear.
Delay Remote
Time Time
---- ----
---- ----
v 1.1 — July 2015
Input Cycle
Mode Enabled
---- ----
---- ----
System Setup Screen
Operation - BOOST Button
Select
System enters Boost indefinitely.
System remains in Boost until the
timer expires.
119