Transferring Data To The Network; Transferring Data Using A Usb Storage Device - Husky Altanium Matrix2 User Manual

6.1.10 Transferring Data to the Network

Use the Mold Setup screen to transfer Altanium data to the network. When Altanium is
connected to the network, the network folder structure appears by default on the Mold
Setup screen. The network folders disappear when a USB device is plugged in.

6.1.11 Transferring Data Using a USB Storage Device

Altanium data can be transferred using USB disks or USB CD-ROM drives. When one of these
devices is plugged into the USB port, the folder structure of the USB storage device appears
on the right side of the Mold Setup screen. The icon disappears when the device is
unplugged. To load the files, copy and paste files from the USB disk to the local drive.
56
v 1.1 — July 2015 Altanium Matrix2
Transferring Data to the Network