Saving Changes To A Mold Setup File; Discarding Changes To A Mold Setup File; Saving The Current Mold Setup File As A New File - Husky Altanium Matrix2 User Manual

an existing setup file, renaming the file to 'New Setup' then copying the file to the Default
folder. The intention is to provide a user specified starting point for all setup files instead of
the factory default.
To create a new mold setup file, do the following:
1.
2.
3.
4.

6.1.3 Saving Changes to a Mold Setup File

Once a Mold Setup file has been loaded, any changes made to it can be permanently saved.
To permanently save changes to a Mold Setup file do the following:
1.
2.

6.1.4 Discarding Changes to a Mold Setup File

All changes to a mold setup file are held in the system's data base until they are permanently
saved or discarded. Discarding changes will take the mold setup file back to its state after that
last save was performed.
To discard changes to a Mold Setup file, do the following:
1.
2.

6.1.5 Saving the Current Mold Setup File as a New File

Once a Mold Setup file has been loaded, it can be saved as a new file.
To save the currently loaded Mold Setup file as a new file, do the following:
1.
2.
54
On the Mold Setup screen, touch the desired mold folder.
Touch the New Mold Setup button. A dialog box will open.
Enter the name of the new mold setup.
Touch the Accept button.
On the Mold Setup screen, touch the Save Changes button. This will display the Mold
Setup - Save dialog box for confirming the mold and name of the file that the changes
are to be saved to.
Touch the Accept button.
All changes have now been permanently saved to the currently loaded Mold Setup File.
On the Mold Setup screen, touch the Discard Changes button. This will display the
Mold Setup - Discard dialog box for confirming the mold and name of the file that the
changes are to be discarded from.
Touch the Accept button.
All changes have now been permanently discarded from the currently loaded Mold
Setup File.
On the Mold Setup screen, touch the Save As button. This will display the Mold Setup
- Save As dialog box for confirming the mold and new name of the file.
Touch the Accept button.
v 1.1 — July 2015 Altanium Matrix2
Saving Changes to a Mold Setup File