Manual Control Buttons; Ready Conditions - Husky Altanium Matrix2 User Manual

User Guide

16.3.2 Manual Control Buttons

Use the Manual Control buttons to indicate current position of the stems, change the
position of the valve gates and to calibrate UltraSync-E.

16.3.3 Ready Conditions

Use the ready conditions status indicators to determine what steps are required to put
UltraSync-E into Engaged mode.
Manual Control Buttons
v 1.1 — July 2015
Item
Disengaged Button
Activates Disengaged mode, where UltraSync-E is controlled by the operator
using the Altanium user interface.
Disabled Button
The UltraSync-E servo system is disabled.
Item
Close Valve Gates
This button closes the valve gates. When the stems are at close position, the
button is highlighted with a yellow outline.
Open Valve Gates
This button opens the valve gates. When the stems are at open position, the
button is highlighted with a yellow outline.
Calibrate
This button starts the calibration sequence.
UltraSync-E, If Equipped
Description
Description
193