Setting The Manual Standby Timer; Setting The Remote Standby Timer; Setting The Delay Standby Timer - Husky Altanium Neo2 User Manual

User Guide
Standby timer is used to protect the material from burning if the molding machine is stopped
for a specified period

9.4.1.1 Setting the Manual Standby Timer

Once the system is in manual standby the manual standby timer starts to count down. When
the time limit is over the system will return to run mode.
To set the manual standby timer:
1.
2.
3.
4.

9.4.1.2 Setting the Remote Standby Timer

The Input Option settings and Standby Cycle Enable setting determine how the system
reacts when it receives the Remote Standby input.
NOTE:
To set the remote standby timer:
1.
2.
3.
4.

9.4.1.3 Setting the Delay Standby Timer

The Delay Standby timer is a feature available with Remote Standby. If a Delay Standby time
is set, Neo2 will not decrease the temperatures until the delay time has elapsed.
For example, when the operator opens the door on the molding machine to check the mold,
a signal to start Delay Standby could be sent to Neo2. If the door is closed before the delay
time has elapsed, Neo2 will not enter Standby. If the door remains open, Neo2 then enters
Standby
To set the delay standby timer:
1.
2.
3.
4.
Setting the Manual Standby Timer
v 1.4 — September 2015
On the Home screen, touch TIMERS.
Touch MANUAL STANDBY TIMER.
Enter the new timer value (HH:MM:SS).
Touch Enter.
If the system is not equipped with Remote Standby, only the Manual Standby timer
setting is displayed on the Timers screen.
On the Home screen, touch TIMERS.
Touch REMOTE STANDBY TIMER.
Enter the new timer value (HH:MM:SS).
Touch Enter.
On the Home screen, touch TIMERS.
Touch DELAY STANDBY TIMER.
Enter the new timer value (HH:MM:SS).
Touch Enter.
System Setup and Customization
73