Resetting The Part Counter - Husky Altanium Matrix2 User Manual

User Guide
Figure 10-10 System Setup Screen - Part Counting
1. Part Counting Area
Figure 10-11 Part Counting - Setup Dialog Box

10.1.14.1.1 Resetting the Part Counter

When activated, Digital Input 8 (Reset Parts Counter) will automatically reset the Parts in
Sack parameter and Parts display on the system header to zero when the current part count
is greater than or equal to the sack full limit. For more information on configuring digital
inputs/outputs refer to
To manually reset the Part Counter, do the following:
Resetting the Part Counter
v 1.1 — July 2015
Section 13.1.
System Setup Screen
1 1
127