Husky Altanium Matrix2 User Manual page 149

User Guide
Figure 10-19 Staging Screen - Startup and Shutdown
Staged Startup Enable
Run Last Stage Indefinitely
Stage x Soak Timer
Stage x Temperature
Stage x Power
Staging Screen
v 1.1 — July 2015
Item
Enables or disables the staged startup sequence.
If this setting is enabled, all zones in the last assigned stage will
not change to their normal setpoint once all zones have achieved
the stage setpoint and the soak timer has expired.
The amount of time at each stage the zones "soak" at their stage
setpoints before the next stage begins.
The temperature setpoint that the zone heats to during stage x.
The setpoint that is used when zones are in manual regulation
during stage x.
System Setup Screen
Description
137