User Guide
7.5.10 Changing a Zone Name
Customize the name of each zone in the system to make it easier to find and make changes.
Rename each zone to correspond with a cavity, gate, probe or manifold, or to any
appropriate name.
To rename a zone, do the following:
1.
2.
Figure 7-8 Zone Name Dialog Box
3.
7.5.10.1 Changing Multiple Zones Names
Use the Auto+ button to rename and number multiple zones. The Auto+ button will number
the selected zones from 001 to n, where n is the number of zones selected. For example, if
renaming 7 zones, the Auto+ button will rename the zones sequentially from 001 to 007.
To number and rename multiple zones, do the following:
1.
2.
Changing a Zone Name
Touch the zone to be renamed.
Touch the Zone Name field and enter a new zone name.
NOTE:
Refer to
Section 7.5.10.1
To select commonly used zone names, use the following keys:
•
zone
•
probe
•
tip
•
nozzle
•
sprue
•
manifold
•
bridge
•
valve gate
•
not used
Touch the Accept button.
Select the zones to be renamed.
Touch the Zone Name field and enter a new zone name for all the selected zones.
v 1.1 — July 2015
for information about renaming multiple zones.
Making Adjustments
71