User Guide
15.3.1 Altanium X/H-Series Card Cage
Figure 15-6 X/H-Series Card Cage
Access all user-serviceable parts, including fuses and circuit boards, by loosening the upper
and lower slotted screws on each heat sink assembly and then sliding a screwdriver between
the horizontal silver post and the ledge on the cabinet and gently prying the board out.
Located inside each card cage are one to six Intelligent Control Cards (ICC
single Passive Backplane.
IMPORTANT!
Although they look similar, ICC
compatible with each other.
IMPORTANT!
An Intelligent Control Card must be present in the position labeled 1 in all card cages for the
system to function properly.
WARNING!
Hazardous voltages– risk of death or serious injury. Before servicing the Altanium unit
lock out and tag the Altanium Main Power switch in accordance with local codes.
Altanium X/H-Series Card Cage
v 1.1 — July 2015
2
3
and ICC
cards use different backplanes and are not
Maintenance
2
3
or ICC
) and a
179