Multi Group View Screen - Husky Altanium Matrix2 User Manual

User Guide
Table 4-4
4.2

Multi Group View Screen

Use the Multi Group View screen to view all user configured zone groups. Each group has
its own controls for synchronously turning all zones in the group on or off, and putting them
into standby or boost mode.
NOTE:
IMPORTANT!
The Stop, Start, Standby, and Boost buttons at the top left corner of the screen apply to all
zones and will override the group settings.
Touch the column heading to sort the information in that column. A red line at the top of the
column header indicates the information is in ascending order. A red line at the bottom of
the column header indicates the information is in descending order.
NOTE:
Select a single zone or a block of zones to automatically open the Quick Set screen with that
zone or block of zones selected.
Multi Group View Screen
v 1.1 — July 2015
Screen Buttons (Continued)
Screen
Profile
Setup
For information about creating groups, refer to
Touching the top right screen icon toggles the multi group view screen between a
two column view and a one column view.
Altanium Operator Interface
Description
Section 7.2.
27