Cross-Talk Screen; Temperature Graphs Screen - Husky Altanium Matrix2 User Manual

User Guide
8.3

Cross-Talk Screen

On the Diagnostics Results screen, touch the Cross-Talk button to open the Cross-Talk
screen. Use this screen to view how much heat transfer is occurring between zones in the
mold. A zone in a correctly wired mold with no thermal isolation issues will display 100%, all
other zones will display 0%.
For example, Zone 9 finishes the test and shows 100%, but zone 10 shows 60%. If zone 9
increased 10 degrees during the test, zone 10 increased 60% of this 10 degrees, or 6 degrees,
without having any energy applied.
Figure 8-3 Cross-Talk Screen
Zone
Zone Name
Cross-Talk
To view the cross-talk information, do the following:
1.
2.
8.4

Temperature Graphs Screen

To open the Temperature Graphs screen, do the following:
Cross-Talk Screen
Item
The zone number.
The name of the zone.
The amount of cross-talk between zones.
On the Mold Diagnostics screen, select the desired zones.
Touch the View Cross Talk button.
NOTE:
A maximum of 10 zones at a time can be selected and viewed.
v 1.1 — July 2015
Description
Mold Diagnostics
91