the desired temperatures for the heaters in the mold to cool down to when the system is in
Standby; both manual standby and remote standby. The default setting for both the manual
and remote standby setpoints is 121 °C (250 °F).
7.5.16.2.1 Changing the Manual Standby Setpoint Limits
To change a standby setpoint and standby setpoint limits for a zone, do the following:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Touch the Power Minimum field and enter a value.
11. Touch the Accept button.
12. Touch the Power Maximum field and enter a setpoint value.
13. Touch the Accept button.
7.5.16.2.2 Changing the Remote Standby Setpoint Limits
To change a remote standby setpoint and remote standby setpoint limits for a zone, do the
following:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Touch the Power Minimum field and enter a value.
11. Touch the Accept button.
12. Touch the Power Maximum field and enter a setpoint value.
13. Touch the Accept button.
76
Touch the zone to be changed.
Touch the Temperature Setpoint field and enter a value.
Touch the Accept button.
Touch the Temperature Minimum field and enter a value.
Touch the Accept button.
Touch the Temperature Maximum field and enter a value.
Touch the Accept button.
Touch the Power Setpoint field and enter a value.
Touch the Accept button.
Touch the zone to be changed.
Touch the Temperature Setpoint field and enter a value.
Touch the Accept button.
Touch the Temperature Minimum field and enter a value.
Touch the Accept button.
Touch the Temperature Maximum field and enter a value.
Touch the Accept button.
Touch the Power Setpoint field and enter a value.
Touch the Accept button.
v 1.1 — July 2015
Changing the Manual Standby Setpoint Limits
Altanium Matrix2
Need help?
Do you have a question about the Altanium Matrix2 and is the answer not in the manual?