Chapter 1 Introduction; General Safety - Husky Altanium Matrix2 User Manual

User Guide

Chapter 1 Introduction

This User Guide includes general warnings and cautions to avoid injury to personnel and
damage to the system. These warnings and cautions are not intended to be, nor are they all-
inclusive to every condition or application that may occur during operation. Maintenance
and safety procedures remain the sole responsibility of the individual and his or her
company.
IMPORTANT!
Some manuals may contain addendums that detail new or updated information. Before
reading a manual, make sure to review all available addendums located at the end of the
manual.
1.1

General Safety

WARNING!
Electrical shock risk - de-energize controller prior to connecting, disconnecting or
servicing the controller, hot runner or mold.
WARNING!
Electrical hazard - risk of shock or personal injury. ALWAYS ensure the screw on the
back of the top portion of the controller, marked with the general warning symbol, is
installed when controller is energized. This is the grounding point for the top cover to
the chassis. Removal of this screw could cause an unsafe condition unless proper
precautions are taken such, as Lock Out Tag Out (LOTO).
WARNING!
Gas/vapor hazard - risk of respiratory injury. Certain processed materials could release
harmful gas, vapors or dust. Install an exhaust system according to local codes. Plastic
degrades with prolonged exposure to the setpoint temperature. Do not leave machine
and controller unattended.
General Safety
v 1.1 — July 2015 Introduction
1