Clock Key And Light A2-18; Pump Key And Light A; Clear Faults Key; Power Switch 42.'Ib - Nordson 3100V Series Customer Product Manual

A2-18
Description
HEATERS Key and
Light
Pressing
the HEATERS key turns power to the heaters on and off.
The
heaters
must
be
turned on for the unit to operate.
The HEATERS light turns
on
when this feature is active.
NOTE:
lf the system is set for auto-energize heaters, the heaters are
automatically enabled and the HEATERS light turns on when the
POWER
switch
is
turned
on.
CLOCK Key and
Light
Pressing
the CLOCK key turns the seven-day clock on and
off.
When
the clock is on, the system
is
controlled
by
the settings for ENTER
STANDBY EXIT STANDBY HEATERS ON, and HEATERS
OFF.
The CLOCK light turns on when this feature is active.
NOTE:
lf
the clock feature is enabled when the
POWEH
switch
is
turned
otf,
it
will automatically be enabled when the switch
is
turned back
on.
The CLOCK light will turn on to show that the clock feature is enabled.
PUMP Key and
Light
Pressing
the
PUMP key turns
the pump on and off.
The PUMP light
turns on when this feature is active.
NOTE:
lf the system is set for auto-energize pump, the pump turns on
either when
the READY light turns on or when the tank reaches the
temperature you have specified.
CLEAR FAULTS Key
Pressing the CLEAR FAULTS key runs
a
system
test.
The test lasts five
seconds and verifies that the problem causing a system fault was
corrected.
lf
the problem was corrected, the FAULT light in the System
Status area
of
the operator panel will turn off once the test is completed.
lf
the problem was not corrected, the FAULT light will stay
on.
POWER Switch
Pressing
the POWER switch turns power to the applicator on or
off.
A2
EN-03-[3V-/I-AXXVI-2
41-3000v
lssued 2/99
GD999 Nordson Corporallon
All righls reserved