Nordson 3100V Series Customer Product Manual page 55

A
2-G
Description
TanR The tank melts the adhesive and holds it until it is pumped to the
dispensing
guns.
With its aluminum construction, cast-in heaters, and
integral melting fins, the
tank is designed for efficient heat transfer. A
strainer
in
the tank prevents unmelted adhesive from blocking the pump
inlet when
you fill the tank.
lt
also prevents pieces of cardboard and
other
small objects from entering the pump.
The standard tank
is
Teflon-coated for easy cleaning.
A non-coated tank
is available
on some units.
Refer
to
Specifications in this section for the tank storage capacity and
other key information about the tank.
1
2
4
3
atanTAl
Fig.
A2-4
Key
Parts of the Tank
1.
Tank casting
2.
Strainer
3.
Melting fins
4.
Heater connectors
A2
EN-03-[3V-4-AXXVI-2
41
-3000v
lssued 2/99
Gr999 Nordson Corporatlon
All rights reserved