Nordson 3100V Series Customer Product Manual page 51

A2-2
Description
3.
Functional Description
The Series
34007applicator
is
the main component
of
your hot melt
system. The applicator
melts
the adhesive, controls it at your setpoint
(operating)
temperatures, and pumps
it
through hoses to the dispensing
guns.
The dispensing guns apply the adhesive to the surface of your
product or package.
Figure A 2-1 shows a Series 34007applicator along with other key
components of a hot melt system.
41XOO21
Fig. A
2-1
Hot Melt System with a Series 3400VApplicator
The applicator has three basic modes of operation:
.
the startup mode
.
the operating mode
.
the standby mode
Each
mode is briefly described
in
the
following paragraphs.
A2EN-03-[3V{-AXXVI-2
41-3000y
lssued 2/99
@ 1999 Nordson Corporation
All
rights reserved