Checking The Warning Or Fault Log - Nordson 3100V Series Customer Product Manual

A
4-8
Operation
Checking the Warning or Fault
Log
Use
this procedure to check the warning
or
fault
log.
These logs list the
causes
of
the three most recent warnings
or
faults. The
actual
temperature display shows the length
of
time the heaters have been
on
when the
warning/fault occured.
1.
Press the Move Up and Move Down keys until the SYSTEM
SETTINGS light turns
on.
2.
Press
the
Up key below the Selector display until the feature number
of the
warning or fault you want to check appears
in
the display.
Flefer to Table
A
4-1 or A 4-2.
NOTE:
Press the right arrow key to scroll through the features
in
increments of
10.
Table A
4-1
Warning Log Feature Numbers
Table A
4-2
Faull Log Feature Numbers
Feature No. Warning Displayed
35
36
37
The
zone number and warning code for the
most recent warning will be displayed
in
the
Multipurpose display.
The zone number and warning code for the
second most recent warning will be
displayed
in
the Multipurpose display.
The zone number and warning code for the
third most recent warning will be displayed
in the Multipurpose display.
Feature
No.
Fault Displayed
27
28
29
The zone number and fault code for the
most recent fault will be displayed in the
Multipurpose display.
The
zone number and fault code for the
second most recent fault will be displayed
in the Multipurpose display.
The zone number and fault code for the
thiid most
recent fault
will be displayed
in
the Multipurpose display.
A4EN-06-[3V-A-AAXV]-1
41
-3000v
lssued 5/00
e000
Nordson
Corporation
All rights reserved