Nordson 3100V Series Customer Product Manual page 386

Hot melt material applicator with 6:1 sp30 piston pump and vista'controller
Hide thumbs Also See for 3100V Series:
Table of Contents

Advertisement

Glossary
F 1-5
Solid Sfate
Circuitry
Solid Sfafe Device
Solvent
Stringing
Substrate
Tank Capacity
Tank Strainer
TanR
Volume
Temperature Sensor
Temperature Setback
Thermopl astic Material
Timing Device
Touch Pad
Unlubricated
Air
Viscosity
An electronic circuit whose operation depends upon any combination of
optical, electrical or magnetic phenomena within
a
solid.
Specifically
excluded are circuits that depend upon physical movement, as well as
those requiring either contact with or avoidance of other solids, liquids,
gases or plasmas.
A device whose electricalfunctions are performed by semiconductors or
otherwise completely static components such as resistors and capacitors.
The device may contain components that do not depend on electronic
conduction in
a
vacuum or gas.
ln
the Nordson context, a material used to dissolve hot melt adhesive to
facilitate system cleaning.
A defect in adhesive application characterized by hair-like fibers of
adhesive emanating from the trailing edge
of
the
bead. Stringing
may
produce
continuous fibers attached to
the nozzle. lt
is most often caused
by
the gun temperature being too cold.
The material or product on which the adhesive
is
applied.
The amount of material that the tank can hold with the fluid level 25 mm
(1 inch)
from the top of the hopper
or
tank.
A product feature that helps keep large pieces
of
foreign material out of
the pump.
The volume that the tank can hold when it
is
filled.
The displacement of
the
pump
is
taken into account
in
this measurement.
That part of
a
temperature control system that detects the temperature
and
feeds this information to the control device.
A product feature by which the system temperature may be automatically
reduced
to a preset number of degrees.
A
synthetic materialwhich is solid at room temperature, becomes soft
when heated, and returns to solid form upon cooling.
See Pattern Control
Operator interface.
Air free of
oil.
A physical measurement of resistance to
flow.
€1894
Nordson Corporation
All
riqhts reserved
lssued
4/94
Fl
EN-02-[3X-XXXX]-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3400v series3500v series3700v series

Table of Contents